WiFi Shield V2.1 For Arduino

1.Operating voltage: 5V, power consumption <200mA
2.Wireless Standard: IEEE802.11b/g/n
3.Frequency range: 2.4 - 2.497 GHz

WizFi210 is a dynamic power management can be used to achieve low power consumption (standby: 34.0μA; Receive: 124mA; Output: 126mA) the WIFI module. Relative to other market other WIFI module, the power consumption is relatively low. If you use WizFi210 to design products, its power consumption is relatively low, and can set the standby mode (ie when the product requires a long start, but do not require long run, so if you can not run, set the Standby mode, reduce waste power. to be the time to run, and then wake up).
WizFi210 WIFI wireless module based on TTL level serial port to provide wireless communications IEEE802.11b/g/n bridge. Any device with TTL serial port can be easily set up wireless network, remote management and control. Internal integration of multiple communication protocols and encryption algorithms. Simply set the application to achieve a variety of occasions. Arduino-compatible interface specification to facilitate the application to the Arduino project.

Performance Description
1. Standard Arduino laminated design, can be easily plugged into the standard Arduino, MEGA, Romeo and other controller
2. Embedded IEEE802.11b/g/n wireless network
3. Support for access point (AP), the client, gateway and other serial to WLAN mode
4. Support Agreement: UDP, TCP / IP (IPv4), DHCP, ARP, DNS, HTTP / HTTPS Client and Server (*)
5. Support for WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP Encryption
6. Support for UART, SPI (*), I2C (*) interfaces
7. TTL serial port to support wireless applications
8. Data stream transfer rate: 11,5.5,2 Mpbs (802.11b)
9. Operating voltage: 5V, power consumption <200mA
10. Wireless Standard: IEEE802.11b/g/n
11. Frequency range: 2.4 - 2.497 GHz
12. Output Power: 8dBm ± 1dBm
13. Data Rate: 54Mbps-1Mbps
14. Modulation type: DSSS, CCK
15. Dimensions: length 54 × width 49 × 11mm high
16. Weight: about 40g